Compare
PG 8583 CD [WW ADP CM]
Lab washer with pump for AD water, liquid dispensing, DryPlus and conductivity monitoring.
- Performance/cycle, e.g. 128laboratory bottlesFurther loading options
Alternatively, 98 pipettes can be reprocessed per cycle with further laboratory glassware. - Efficient use of resources – variable speed pump heaterThe heart of perfect results
The speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements in the individual programme blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. - Safety – Wash pressure, spray arm and conductivity monitoringFor a reliable result
Outstanding reprocessing results are achieved by the spray pressure and spray arm sensing, which immediately detect a decline in spray pressure or a load blockage. In addition, any deviations from the prescribed conductivity of the water, particularly in the final rinse, are detected. - 72 % less water consumption compared to predecessor model*Save water with flawless resultscompared to standard programme for G 7883 CD
The variable-speed heater pump adjusts its speeds and thus the wash pressure in line with the relevant requirements in the programme blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete soaking of all the load items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. Outstanding results while ensuring sustainable use of resources. - Efficient hot air drying – DryPlusEfficient drying
Hot air drying DryPlus is the optimum solution for hollow instruments or narrow-lumened laboratory glassware. An upstream Class H14 HEPA filter ensures the reliable removal of particles from the air taken in for drying. The filter is easily accessible via a side unit. - Total security – link to process documentation possibleGap-free documentation
The optional addition of a module for process documentation is provided via a communication slot. The Ethernet module is used for documentation via software. The RS 232 module must be used for documentation within a USB solution or via a printer.
Product benefits
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Clear text display
Text display
Everything at a glance: the display shows everything as clear text in the country-specific language.
AutoClose*Patent: EP 1 733 675 B1
Automatically closing door
Very slight pressure against the door is sufficient to activate the AutoClose feature.
Large selection of components
Reprocess flexibly
Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.
Can be built under a worktop
For a consistent look
The machine can be easily integrated under a worktop.
Additional integrable dispenser pumps
Dispense practically and easily
For applications that require additional media, additional dispenser pumps can be integrated into the machine.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PG 8583 CD [WW ADP CM]
EAN 4002515632857 / Article number 62858351AUS / Material number 10226980
EAN 4002515632857 / Article number 62858351AUS / Material number 10226980
| Construction type | Freestanding, can be built-under, wide, with lid |
|---|---|
| Casing | Stainless steel |
| Can be built-under | |
| AutoClose – automatic door lock | |
| Buzzer, acoustic signal at end of programme | |
| Service-friendly design |
| Suitable for laboratories |
|---|
| Laboratory flasks per cycle [number] | 128 |
|---|---|
| Pipettes per cycle [number] | 98 |
| Circulation pump, Qmax in l/min | 500 |
|---|---|
| Maximum final rinse temperature in °C | 93 |
| Wash cabinet usable capacity in l | 145 |
| Tested operating hours | 15000 |
| Control type | TouchControl |
|---|---|
| Programme selection | Touch on Metal |
| Direct-access pushbuttons | |
| Max. delay start in h | 24 |
| Programmability | programmable |
| Programmes [number] | 15 |
| Free programme positions [number] | 2 |
| A0 value controls | |
| Automatic programme restart | |
| Time left display | |
| Programme sequence display | |
| Selectable display languages |
| Electrical connection | 3N AC 400V 50HZ |
|---|---|
| Electric drying class in kW | 8.5 |
| Total rated load in kW | 9.3 |
| Fuse rating in A | 15-16 |
| Length of mains connection cable in m | 1.8 |
| Electrical connection | AC 230V 50HZ |
|---|---|
| Electric drying class in kW | 5.5 |
| Total rated load in kW | 6.3 |
| Fuse rating in A | 30-32 |
| Electrical connection | AC 230V 50HZ |
|---|---|
| Electric drying class in kW | 2.5 |
| Total rated load in kW | 3.3 |
| Fuse rating in A | 15-16 |
| Cold water [number] | 1 |
|---|---|
| Cold water for steam condenser [number] | 1 |
| Hot water [number] | 1 |
| VEP – with feed pump for demineralised water [number] | 1 |
| Required flow pressure in kPa | 200-1000 |
| Maximum delivery head for drain pump in cm | 100 |
| Integrated water softener | |
| Maximum water hardness (cold water/hot water) in mmol/l | 10.7 |
| Drain pump [DN] | 22 |
| Water protection system | Waterproof system |
| Integrated drying unit | |
|---|---|
| Fan in kW | 0.3 |
| Heater element in kW | 2.2 |
| Air throughput in m³/h | 60 |
| Time setting in 1-minute increments | 0-120 |
| HEPA filter class | H14 |
| HEPA filter filtration efficiency (in accordance with DIN EN 1822) in % | 99.995 |
| HEPA filter service life in h | 500 |
| External dimensions, net height in mm | 835 |
|---|---|
| External dimensions, net width in mm | 900 |
| External dimensions, net depth in mm | 700 |
| External dimensions, gross height in mm | 1095 |
| External dimensions, gross width in mm | 1200 |
| External dimensions, gross depth in mm | 800 |
| Wash cabinet, usable height in mm | 520 |
| Wash cabinet, usable width in mm | 530 |
| Wash cabinet, depth of upper basket in mm | 474 |
| Wash cabinet, depth of lower basket in mm | 520 |
| Net weight in kg | 98 |
| Gross weight in kg | 133 |
| Emission sound pressure level in the workplace | <lt/>70 dB(A) re 20 µPa |
|---|---|
| Heat dissipation into the room in MJ/h | 1.4 |
| 1 dispenser pump for liquid cleaning agent | |
|---|---|
| 1 dispenser pump for neutralising agent | |
| Additional integrated dispenser pumps (optional) | |
| Steam condenser | |
| Spray pressure monitoring | |
| Spray arm monitoring | |
| Conductivity monitoring | |
| Interface for process documentation (optional) | |
| Multi-component filter system | |
| Variable-speed heater pump | |
| Load carrier – direct coupling | |
| DryPlus | |
| In-door salt container | |
| Customer Service optical interface | |
| Setting options for process chemicals (3 x 5 l/2 x 10 l) | |
| Wash cabinet seamlessly welded using laser technology | |
| Heater elements outside wash cabinet | |
| Wash cabinet made from high-quality stainless steel (1.4301/304) | |
| Extensive components (option) |
| RS 232 serial interface (optional) | |
|---|---|
| WiFi via DataDiary (optional) | |
| Ethernet interface (optional) |
| VDE (electrical safety) | |
|---|---|
| IP safety class according to EN 60529: IP 21 | |
| EN 61010-1 | |
| EN 61010-2-040 | |
| RoHS guideline 2011/65/EU | |
| Machinery Directive 2006/42/EC | |
| WaterMark |
Additional accessories and consumables
Find additional accessories and consumables to go with this product
Additional accessories for laboratory technology
Find here the accessories that can be bought additionally for this product.
