Support for yourCoffee

Brew unit cannot be inserted

The brew unit cannot be inserted into the coffee machine.

The brew unit drive was not in the home position when the brew unit was removed.

CM 5, CM 6, CM 7:

Prerequisites:

  • The coffee machine is switched on.

  • The side door on the coffee machine is closed.

  • The drip tray and waste container have been inserted into the coffee machine.

Switch the coffee machine off.

Switch the coffee machine on again.

The brew unit drive is initialised automatically.

Slide the brew unit into the coffee machine.

CM 6x60, CVA 7xxx:

This is a technical fault that you cannot remedy yourself.

Please contact the Miele Customer Service Department.

Please book a repair appointment online.

The brew unit is not in the home position.

CVA 6xx

To move the brew unit back to the home position, please proceed as follows:

  • Restoring | Brew unit home position | Coffee machine
  • Press down on the snap lock with your finger .

  • Push the funnel down .

  • Slide the nozzle all the way to the left .

Pressing | Brew unit press | Coffee machine

To restore the home position, press PRESS on the other side of the brew unit once.

The brew unit is restored to the home position.

Correct | Brew unit home position | Coffee machine

The funnel on the brew unit is raised slightly and the connector is in a vertical position.

The brew unit can be inserted into the coffee machine.

If the fault persists, please contact us or book a repair appointment online.

Operating Instructions finder

Operating Instructions finder

Here you will find the operating instructions for your Miele appliances
Find your manual
Book a technician

Book a technician

We are happy to take your repair booking online or by telephone
Plan a visit
Contact us

Contact us

Visit our Contact us page to see the different ways you can speak to us.
Contact us